Serving the Las Vegas area  ·  (725) 726-4175  ·  Open Mon-Sun 7am-7pm
📞 (725) 726-4175 Free Quote

Metal Roofing in Sunrise Manor, NV (89110) · Local Professionals

Las Vegas Metal Roofing · Fast response in Sunrise Manor and the Las Vegas area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+248Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sunrise Manor runs east from Las Vegas Boulevard up toward Frenchman Mountain, a stretch of 1970s and 80s ranches, stucco tract homes, and manufactured houses that take some of the hardest sun in the valley. If your shingle roof is baking at 110 degrees every summer, you already know how fast the granules wear off and how loose the fasteners get.

We are Las Vegas Metal Roofing, and we work Sunrise Manor and ZIP 89110 every week. Whether you are near Sam's Town on Boulder Highway or up off Hollywood Boulevard, we can tell you what your roof is up against just by looking at the age of the shingles and the way the afternoon sun hits that west-facing slope.

Metal Roofing in Sunrise Manor (89110)

Most of the housing stock here went up between 1970 and 1990, which means the original shingle roofs are on their second or third layer, and the underlayment underneath is long past its prime. The desert does not help. UV at this elevation bakes sealant and asphalt until it cracks, and the daily swing from a 60 degree morning to a 110 degree afternoon works screws and nails loose year after year. We see a lot of lifted ridge caps and popped fasteners after the spring winds come through, and when the July monsoon hits, water finds every gap in flashing around chimneys and skylights. A lot of these lots are tight, with block walls and RV gates, so we plan panel staging and dumpster placement before we ever pull up. We also handle the older manufactured homes and patio covers where exposed-fastener R-panel is the practical choice, and we know how to match the light reflective finishes that make sense on a west-facing roof under Frenchman Mountain.

Our team has been working the Las Vegas Valley for years, from the older ranches near Sam's Town to the newer subdivisions out toward the mountain. We know the difference between a Sunrise Manor re-roof and a Summerlin tile job, and we price and schedule accordingly.

Our services in Sunrise Manor

How a Job Works in Sunrise Manor

Step 1: you call (725) 726-4175 or request a free estimate online, and we set up an on-site assessment. We walk the roof, check the attic if you have one, look at the flashing and fasteners, and give you a written scope with pricing. No pressure, no surprises.

Step 2: once you approve, we pull the permit with the city or county (roofing permits are commonly required for a full replacement, and thresholds vary by jurisdiction, so we verify with the local building department). We schedule around weather and HOA rules if your neighborhood has them. On tight Sunrise Manor lots, we stage panels in the driveway or on the street according to the permit, and we protect landscaping and block walls as we go.

Step 3: we clean up every day, magnet-sweep for nails, and do a final walkthrough with you. We do not leave until you have seen the finished roof and know exactly what was done.

Pricing in Sunrise Manor depends on the size and pitch of your roof, how many layers are already there, and how much repair the flashing and decking need. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters run from $9 per linear foot. Every roof is different, so call (725) 726-4175 for a free estimate and a real number for your property.

My 1978 ranch off Hollywood Boulevard has two layers of shingles and leaks at the chimney. Can you fix it without a full tear-off?
Yes, in many cases. If the decking is sound, a metal roof over shingles (retrofit) can save you the cost of tear-off and disposal, and it is allowed as long as the existing layers are within code limits. We inspect the decking and flashing first, and if the chimney flashing is the source of the leak, we repair or replace it as part of the job. We will tell you honestly if a tear-off is the better long-term call.
A windstorm peeled back some panels on my carport near Sam's Town. How fast can you get out there?
We treat storm and wind damage as a priority. Call (725) 726-4175 and we will schedule an inspection, often same or next day depending on volume. We document the damage for your insurance claim if you are filing one, and we can make temporary repairs to stop water intrusion until permanent fixes are approved.
What does a typical metal roof cost for a 1,500 square foot house in Sunrise Manor?
For a house that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam runs closer to $10 per square foot. A retrofit over existing shingles starts at $7. The final number depends on roof complexity, pitch, access, and whether any decking or flashing needs repair. We give free estimates so you can see the exact breakdown.
Do I need a permit to replace my roof in Sunrise Manor, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in the Las Vegas area, and requirements vary by jurisdiction. We handle the permit application and inspections as part of the job, and we verify current rules with the local building department before we start. If your home is in an HOA, we also help with any design review paperwork.
My neighbor's tree drops limbs on my roof, and the HOA wants a specific panel color. Can you help with both?
Yes. We can trim back overhanging limbs as part of the repair if they are on your side of the property line, and we can recommend panel profiles and colors that meet HOA guidelines. If there is a property line dispute, we stay out of that and focus on your roof, but we document existing conditions so you have a clear record.
Are you insured for work on my Sunrise Manor property?
We are fully insured, with general liability and workers' compensation coverage. We can provide a certificate of insurance before work starts, and we recommend asking any contractor you hire for the same.
What maintenance does a metal roof need in Sunrise Manor's heat and dust?
Once a year, ideally in spring before the monsoon, have us check fasteners, sealant around flashing and penetrations, and clear debris from valleys and gutters. The UV here is hard on sealant, so a quick inspection and touch-up can prevent a leak. We offer free inspections and can set up a reminder schedule for you.
Why choose us?

Trusted professionals in Las Vegas

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Vegas

All your work handled by qualified professionals in Las Vegas

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

248+ Verified Client Reviews in Las Vegas

⭐⭐⭐⭐⭐ 4.9/5 · 248 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Vegas · Response within 24h · No commitment · ☎ (725) 726-4175

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Vegas ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm