Serving the Las Vegas area  ·  (725) 726-4175  ·  Open Mon-Sun 7am-7pm
📞 (725) 726-4175 Free Quote

Metal Roofing in Henderson, NV (89012) · Local Professionals

Las Vegas Metal Roofing · Fast response in Henderson and the Las Vegas area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+248Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Henderson is a city of stucco subdivisions and tile roofs, from the planned communities of Green Valley and Anthem to the older homes near Water Street. The desert sun and summer heat above 110 degrees take a toll on those concrete tile and shingle roofs, baking the underlayment and loosening fasteners. If you live in ZIP 89012, you have probably seen neighbors upgrading to stone-coated steel or standing seam metal.

We are Las Vegas Metal Roofing, and we serve Henderson homeowners and property managers with metal roofing installation, repair, and replacement. We know the local housing stock, from the 1990s tract homes near Green Valley Ranch to the custom homes in Seven Hills, and we understand the wind, sun, and monsoon challenges that come with roofing here.

Metal Roofing in Henderson (89012)

Henderson sits in the Las Vegas Valley at about 2,000 feet, ringed by the McCullough Range and the Black Mountains. The intense UV and wide daily temperature swings are hard on any roof, but metal handles them better than most. Many Henderson homes have concrete tile roofs that are now 20 to 30 years old, and the underlayment beneath is often failing even if the tiles look fine. We frequently recommend stone-coated steel in a Spanish tile profile to match the existing look, or standing seam in a reflective finish to cut cooling costs. The desert soil and flash floods during monsoon season mean proper flashing and drainage are critical, especially on sloped lots in neighborhoods like MacDonald Ranch.

Our team has been installing and repairing metal roofs across the Las Vegas area for years, and we have seen just about every roofing challenge Henderson can throw at us. From tight lot access in older parts of town to HOA design reviews in master-planned communities, we know how to get the job done right.

Our services in Henderson

How a Job Works in Henderson

Step 1: Call us at (725) 726-4175 or fill out our online form to schedule a free on-site assessment. We will inspect your current roof, discuss your options, and provide a detailed written estimate. We will also help you understand any HOA requirements or city permits that may apply.

Step 2: Once you approve the estimate, we schedule the work. For a full replacement, we typically tear off the old roofing, inspect and repair the decking, install new underlayment, and then install your new metal roof. In Henderson, we coordinate with the city building department for permits and inspections, and we follow HOA guidelines for color and profile. We keep the job site organized and safe, especially on tight lots where access is limited.

Step 3: After installation, we do a thorough cleanup, including magnet sweeping for nails, and walk you through the finished roof. We do not consider the job done until you are satisfied. We leave your property clean and your new roof ready to protect your home for decades.

Metal roofing costs in Henderson depend on the material, roof size, and complexity. For example, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation at $8 per square foot, and standing seam at $10 per square foot. Stone-coated steel and metal shingles start at $9 per square foot. If you are replacing an existing roof, metal roof replacement starts at $9 per square foot, and a retrofit over shingles starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. These are ballpark figures; your actual cost will depend on factors like roof access, the condition of the decking, and whether any structural repairs are needed. Call us at (725) 726-4175 for a free estimate tailored to your home.

My home in Green Valley has a concrete tile roof that is about 25 years old. Can you install a metal roof over it, or do I need a full tear-off?
In most cases, we recommend a full tear-off for tile roofs because the underlayment is likely near the end of its life. However, if the underlayment is in good condition and the decking is sound, a metal roof over existing tile might be possible, but it is less common. We will evaluate your roof during a free inspection and give you honest advice. Keep in mind that building codes limit the number of layers, so we will check with the city to ensure compliance.
A monsoon storm just blew some panels loose on my roof in Henderson. How quickly can you respond for emergency repairs?
We understand that storm damage can be stressful. We offer emergency repair services and aim to respond as quickly as possible. Call us at (725) 726-4175, and we will schedule an inspection, typically within 24 to 48 hours, depending on demand. We will secure the roof to prevent further damage and provide a detailed repair estimate.
What is the typical cost to replace a shingle roof with a standing seam metal roof on a 2,000 square foot home in Henderson?
For a 2,000 square foot home, a standing seam metal roof typically costs between $20,000 and $30,000, depending on the complexity of the roof, the gauge of the metal, and any necessary decking repairs. This is a ballpark range; we provide a free estimate after inspecting your property. Factors like roof pitch, number of penetrations, and HOA requirements can affect the final price.
Do I need a permit from the City of Henderson to install a metal roof, and how do I find out about the requirements?
Yes, roofing permits are generally required for a full replacement or re-roof in Henderson. The requirements and fees vary, so it is best to check with the city directly. You can visit the City of Henderson website for contact information and to learn more about building permits. We can also help guide you through the permit process as part of our service.
My HOA in Seven Hills requires approval for roof color changes. Can you help with the application, and what if my neighbor complains about the noise?
We are familiar with HOA requirements in Henderson communities and can provide the necessary documentation, such as product specifications and color samples, to help you get approval. As for noise, metal roof installation typically occurs during normal business hours, and we follow local noise ordinances. We also maintain a clean job site and are respectful of your neighbors.
Are you fully insured for roofing work in Henderson, and what kind of coverage do you carry?
Yes, we are fully insured and carry both general liability and workers' compensation insurance. This protects you and your property in the unlikely event of an accident.
What maintenance does a metal roof need in Henderson's desert climate, and how often should I schedule inspections?
Metal roofs are low maintenance, but in Henderson's dusty and windy environment, we recommend annual inspections to check for loose fasteners, debris buildup, and sealant wear. Cleaning gutters and removing debris after storms is also important. We offer inspection services starting with a free estimate, so call us to schedule yours.
Why choose us?

Trusted professionals in Las Vegas

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Vegas

All your work handled by qualified professionals in Las Vegas

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

248+ Verified Client Reviews in Las Vegas

⭐⭐⭐⭐⭐ 4.9/5 · 248 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Vegas · Response within 24h · No commitment · ☎ (725) 726-4175

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Vegas ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm