Serving the Las Vegas area  ·  (725) 726-4175  ·  Open Mon-Sun 7am-7pm
📞 (725) 726-4175 Free Quote

Metal Roofing in Pahrump, NV (89048) · Local Professionals

Las Vegas Metal Roofing · Fast response in Pahrump and the Las Vegas area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+248Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pahrump is wide-open desert country, and the roofs out here take a beating that valley subdivisions never see. On large parcels off Highway 160 and around the Calvada Meadows and Golden Village areas, you'll find ranch homes, metal workshops, RV shelters, and patio covers, many of them on lots measured in acres rather than feet. The sun is relentless, the spring winds are real, and when the monsoon rolls in from the Spring Mountains, water moves fast across hard caliche ground.

That's why property owners in Pahrump (89048) call Las Vegas Metal Roofing. We understand the difference between a shingle roof that bakes and cracks in the desert and an exposed-fastener metal roof built to shed heat and shed water.

Metal Roofing in Pahrump (89048)

Pahrump is not a tract-home town. Most properties sit on quarter-acre to five-acre parcels, and a lot of them have outbuildings, workshops, carports, and RV covers that need metal, not asphalt. The ground here is hard caliche and desert gravel, which means drainage is less about soil absorption and more about where the water runs when it comes off a roof in a hurry. We see a lot of exposed-fastener R-panel and corrugated roofing on shops and patio covers, standing seam on homes that want a cleaner look and fewer penetrations, and stone-coated steel where someone wants the Spanish tile profile without the weight and maintenance of actual tile. Access can be the real challenge: long gravel driveways, gates, and narrow pull-throughs mean we plan material staging and equipment before we ever start. And because Pahrump sits higher and drier than the Las Vegas Valley floor, the daily temperature swing is wider, which works fasteners loose over time. That's the failure mode we fix most often out here: backed-out screws, wallowed-out holes, and seams that have opened up after a few summers.

Our team has worked metal roofs across Pahrump and the greater Las Vegas area, from simple leak repairs to full replacements on ranch homes and commercial shops. We know what holds up in this climate because we see what fails here, not what fails in a brochure.

Our services in Pahrump

How a Job Works in Pahrump

Step 1: You call us at (725) 726-4175 or request a free estimate, and we schedule an on-site assessment. We walk the roof, check the fasteners, seams, flashing, and underlayment condition, and look at how water actually drains off your property. For a shop or outbuilding, we look at the panels and the structure underneath. You get a written scope and a clear price before anything starts.

Step 2: We handle the work. On rural Pahrump lots, that often means coordinating delivery and staging around long driveways and gates, and planning around the wind, which picks up most afternoons. If your project needs a permit, we walk you through what the local building department requires, since thresholds and inspections vary. For HOA or historic review, we help you get the panel profile and color approved before we order material. Then we tear off or retrofit, install, and keep the site secure each day.

Step 3: We clean up. Magnets for screws, a full sweep of the yard and driveway, and a final walkthrough with you to review the work, the warranty, and any maintenance notes. We leave your property the way we found it, minus the old roof.

Pricing in Pahrump depends on the job, but here are honest ballpark starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing, which is common on shops and patio covers out here, starts at $5.50 per square foot. Metal shingle and stone-coated steel both start at $9, and copper or specialty metal at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, gutters at $9 per linear foot, and snow guards and ice protection at $1,200. The real cost drivers are square footage, roof pitch and complexity, access on your lot, the condition of the deck and underlayment, and how urgent the work is. Call (725) 726-4175 for a free estimate specific to your property.

My shop roof off Highway 160 has screws backing out and leaking. Can you fix that without a full replacement?
Yes, in most cases. Backed-out fasteners and wallowed holes are the most common metal roof problem we see in Pahrump because of the wide daily temperature swings. We replace the screws with larger, properly sealed fasteners, re-seat any lifted panels, and address the flashing and seams where water is getting in. If the panels themselves are still sound, a re-fastening job starting at $750 is far cheaper than a new roof. We'll tell you honestly if the panels are too far gone.
A spring windstorm peeled back panels on my RV shelter. How fast can you get out to Pahrump?
Storm and wind damage calls get priority. We offer free inspections for storm damage and can usually get to Pahrump within a day or two, sometimes same day depending on the schedule. Call (725) 726-4175, and we'll assess the panels, secure anything loose so it doesn't get worse, and give you a repair estimate. We document the damage for insurance purposes, though coverage decisions are up to your carrier.
What does a typical metal roof replacement cost for a ranch home in Pahrump?
For a typical single-story ranch home, most replacements land in the range you'd expect from our starting prices: $9 per square foot for replacement and $8 for new installation, with standing seam at $10. A 2,000 square foot roof, for example, starts around $16,000 to $20,000 depending on pitch, access, and whether we're removing an old roof or retrofitting. Long gravel driveways, steep pitches, and complex rooflines add cost. We give you a firm written number after a free on-site look.
Do I need a permit to replace my metal roof in Pahrump?
Roofing permits are commonly required for a full replacement or re-roof in Pahrump, and the thresholds, fees, and inspection requirements are set by the local building department, so they must be verified with them directly. We help you understand what's needed for your project and can coordinate the inspection. If you're doing a retrofit over existing shingles, code limits how many existing layers you can recover over, so that gets checked before we start.
My neighbor says my new metal roof panels overhang the property line. What do I do?
Property line issues come up on larger Pahrump lots where fences and surveys aren't always clear. Before any installation, we set the roof layout based on your structure, not the fence line, and we recommend confirming your property corners if there's any question. If an HOA or design review applies, we help you get the panel profile and color approved first. If a neighbor raises a concern, a current survey settles it quickly, and we're happy to adjust the layout before material is ordered.
Are you insured for work on my Pahrump property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job. We're happy to provide proof of insurance before we start, and we recommend asking any contractor for the same.
What maintenance does a metal roof need in Pahrump's climate?
Not much, but a little goes a long way. Once a year, ideally in spring before the wind season and monsoon, check for backed-out screws, lifted panels, and debris in the gutters and valleys. The UV here is brutal on sealants, so flashing sealant should be inspected and refreshed periodically. After a big windstorm or hail event, a free inspection is worth it. We also offer coating and painting starting at $2.50 per square foot to extend the life of older panels and reflect more heat.
Why choose us?

Trusted professionals in Las Vegas

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Las Vegas

All your work handled by qualified professionals in Las Vegas

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

248+ Verified Client Reviews in Las Vegas

⭐⭐⭐⭐⭐ 4.9/5 · 248 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Las Vegas · Response within 24h · No commitment · ☎ (725) 726-4175

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Las Vegas ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm